User Tools

Site Tools


This is an old revision of the document!

Follow these instructions to install an on-premises data gateway.

Once the gateway is set up, follow these quick steps to install Intelligent Plant Industrial App Store Connector. You will need to contact Intelligent Plant in order to obtain the custom connector file.

Setting up the gateway with IndustrilAppStore Connector

Here are the steps to configure gateway side of things (this assumes that you have installed it):

  1. Create a directory that the user which is used to run the gateway service can access (READ). I'll use C:/Documents/Connectors/ as an example for further steps.
  2. Put the issued IndustrialAppStore.mez file into C:/Documents/Connectors/.
  3. In gateway application, click Connectors option and navigate to C:/Documents/Connectors/.
  4. Give it a split second and the Industrial AppStore connector should appear in the box above the path. If it hasn't - try restarting the service, if that won't help make sure you have permissions set correctly. There are log files for more information in the gateway installation directory.
  5. If above worked, that's it! Navigate to and configure background data refresh using gateway option (Make sure Allow user's custom data connectors to refresh through this gateway cluster option is ticked, you can find more info here).

Nore to IP developers here.

powerbi/datarefreshgateway.1581067286.txt.gz · Last modified: 2020/02/07 09:21 by su